Modbus - PLC Simulator

8.1/10 (63 أصوات )

الترجمة الالية للوصف
السماح لك لاختبار أجهزة رئيسية modbus خلال مسلسل EditByBrothersoft : حرر هذا البروتوكول محاكاة صممت للسماح للاختبار الأجهزة الرئيسية modbus على المسلسل ، وبالتالي الاسم : لماذا تسمي MOD_RSSIM؟



  • مرات التنزيل: 1430
  • متطلبات التشغيل: Windows 7, Vista, XP, 2000, 98, Me
  • الحجم: 482KB
  • الترخيص: Freeware Free
  • الاصدار : PLC
  • اضيف في: 2009-02-12 00:00:00
  • اخر تحديث: 02/12/2009
  • الموقع علي الانترنت:



استخدام البرامج التي تم تنزيلها من موقعنا يجب أن يكون وفقاً للقوانين في بلدك.لا نوصي باستخدام برامج تنتهك القوانين في بلدك.،اذا كنت تري ان هذا المحتوي لا يتوافق مع حقوق الملكية الفكرية برجاء ابلاغنا بالضغط هنا



Description

"Allow you to test of modbus master devices over serial"EditByBrothersoft: This free protocol simulator was originally designed to allow testing of modbus master devices over serial, hence the name: Why is it called MOD_RSSIM? Because it started out as a modbus RS232 simulator - but it grew as all applications do, and even after adding TCP/IP support the name still stuck. MOD_RSSIM also allows itself to be used as a"virtual"PLC for comms testing, training and limited use as a source-code resource. Please download it to try it out, if it works for you, about 45 minutes later you will get a nag-screen, either Mail me, or use my free registration-key request screen at the bottom of the page. The sim carries on working after the nag-screen, it just gets tedious clicking on the"OK"button- Download the simulator. - Run it, and select TCP/IP or serial protocol. - If you want serial, you can try using com0com (see the links page) to create a local loopback, and skip the serial cable. - Select your serial port from the settings dialog (or if TCP/IP, simply point your HMI/SCADA to the local IP address) and connect. -Next you can click on the"Comms"button in the bottom-right to see the state of the communication link to see if your master is trying to connect and talk to the simulator already. - Now go and look at your scada/hmi, if it's not already talking, go into your drivers and make sure they are started (in most cases no license will be needed from modbus protocol in your scada simply because it is so popular for verification), and if still not talking, look at your own communication logs. - Unless you are doing something wrong, you should have zeroed values in the SCADA. Now for some fun.. - ...more Steps to follow.
Moshax.com only provide legal software, please help us keeping pur site legal, if you think this page is violating copyrights please let us know by clicking here Here
صور Modbus - PLC Simulator
Modbus - PLC Simulator





التعليقات علي Modbus - PLC Simulator
  1. 1
    hatem badawy

    thank you

    08/05/2010  
اضافة تعليق

تعليقات الفيسبوك

تعليقات الموقع