LessLinux 20100903

8.1/10 (10 أصوات )

الترجمة الالية للوصف

  • مرات التنزيل: 234
  • متطلبات التشغيل:
  • الحجم:
  • الترخيص:
  • الاصدار : 20100903
  • اضيف في: 2010-06-09 00:00:00
  • اخر تحديث: 06/09/2010
  • الموقع علي الانترنت:

استخدام البرامج التي تم تنزيلها من موقعنا يجب أن يكون وفقاً للقوانين في بلدك.لا نوصي باستخدام برامج تنتهك القوانين في بلدك.،اذا كنت تري ان هذا المحتوي لا يتوافق مع حقوق الملكية الفكرية برجاء ابلاغنا بالضغط هنا


LessLinux is not based on any existing distribution and is currently solely intended to be used as a live distribution, started from CD, USB or via PXE.ISOhybrid conversion: Starting with version 3.8x of the Syslinux bootloader an ISO image can be prepared to be a valid hard disk image. Isolinux will boot this image in any case. There is one drawback however: A USB thumbdrive with this ISO image does not contain a writable filesystem anymore. Current LessLinux builds include a conversion routine: If sufficient RAM is found, the complete content of the ISO filessystem is copied to RAM during startup, the thumbdrive is reformatted as FAT32 and a Syslinux bootloader is written.To test this feature, use dd to copy the ISO to the thumbdrive: dd if=lesslinux.iso of=/dev/sdx. On Windows rename the ISO to .img and use Win32ImageWriter to perform this task.Start as Xen domU: With pvops Vanilla kernels getting mature it is possible to boot the same kernel on bare hardware and as Xen domU on the hypervisor. With small changes to the kernel configuration and the startup scripts (to search on Xens harddisks xvda and to open the console hvc0) LessLinux now boots on Xen. The practical usage of this feature will be for development and debugging, but it also offers the possibillity to offer lightweight live distributions as maintenance and rescue systems for hosting environments.To boot on Xen you must convert the initramfs files of the Vanilla Kernel to a format that the domU loader understands — basically converting the multiple compressed cpio archives from /boot/isolinux to a single one:cat devs.img initram.img i2635vn.img | gunzip -c | gzip -c > initrd.imgThen use this configuration file to fire up the domU. On pressing the Return key on hvc0 you get a simple shell where you can use ifconfig to determine the IP adress. Then use VNC to connect to the desktop of your LessLinux-domU.
Moshax.com only provide legal software, please help us keeping pur site legal, if you think this page is violating copyrights please let us know by clicking here Here

التعليقات علي LessLinux 20100903
اضافة تعليق

تعليقات الفيسبوك

تعليقات الموقع